The Addressable Manual Call Point is used for sending a manual alert to an addressable control panel in case of emergency. It has two indicator lights,When in the monitor state, green LED flashes every 3 seconds. Red indicates that the trigger is pressed.
This manual call point is used together with the Addressable Fire Alarm Control Panel our company. It employs the electro-encoding method. The encoding method can refer to the instruction of address encoder.
Operating voltage: DC 20V~30V
Standby current: ≤ 400uA @24V DC
Indicator LED of alarm: Red LED flash quickly
Alarm current: ≤ 2 mA @24V DC
Indicator LED of Standby: Red LED flash every 3 seconds
Connection: Two wires, non-polarity
Flash Period: 60~70 times / minute
Operation temperature: -10℃~50℃
Operation humidity: ≤ 95%RH(no condensation)
Material: ABS
Dimension:L87 * W87 * H58.4 mm
Address: Tbilisi, Ts.Dadiani #7, Qarvasla Mall, 3th Floor, Office A308/1
Email: info@protech.com.ge
Copyright © Protech. All Rights Reserved. Developed By iGenerator